Common Questions
1
What material can you print on?
We can print on any hard surface that is less than 8" thick. We print on glass, glass block, ceramic tile, marble, porcelain, metal, wood, canvas, stone, concrete, and rubber. We will try to print on any custom surface that is requested but no guarantee if that surface has a porous surface.
2
What type of glass do you use?
Glass comes in various types, colors and thicknesses. Glass has the ability to be tempered and heat strengthened. For the backsplashes and working surfaces, we recommend 4mm to 6mm heat strengthened or tempered low iron glass. Low iron is more expensive, however, it is the has virtually no natural color to the raw glass. With standard glass, there can be a slight hue of blue or green which can affect the look of the colors through the glass. We always print on the back side of the glass so the ink is away from cleaners, scratches or other mishaps. We can print on any thickness and can also do non tempered depending on end use and location. Most glass is governed by the building code and its use and location.
3
Do you have any size limitations?
Yes we do. Our print table is 24" x 36" (609mm x 914mm). We can create a full wall, no size restriction, of printed glass, but will need a hairline seam to butt the glass together. The seam is not visible at a distance and can be aligned with other items in the area like cupboard doors, receptacles, windows, faucets etc.
If we are doing a solid color, one that does not require a print, we can usually do a backsplash with one or two pieces of glass providing the access to the room, faucet location and windows etc. are in a location that will allow clearance for installation
4
Do you have a size limitation on printing tile?
Most tile is well under our table size so there really is not limitations. We can set up the tile to be printed in sections so that each tile has a portion of the whole print on it and when installed, the final art is shown on the whole wall, floor or any area chosen. Think of each tile as a pixel.
5
Is there an image size requirement?
The size of your image and design need to be carefully reviewed. Lower quality (lower resolution) images may look fine on screen or even when printed to A3 size, but when enlarged to your required splashback or wall size, sometimes up to 3 meters in length, may be prone to issues such as pixilation and blurry appearance. The required size for high resolution images is 300DPI and minimum 5MB and upwards. Downloading an image and enlarging to 250 – 300% on your PC will give you a general idea if the image is of high resolution. If the image is pixilated at this percentage then the image will not be of high enough resolution to use.
6
Where can I find Images?
Due to copyright laws, we cannot print any images downloaded off Google or any other browser. Most of these images are not of high enough resolution, around 72DPI, and most likely be protected by copyright laws.
We recommend the following locations to buy the rights for art,
You can also use any high resolution pictures you have taken or any of the noted art on our site.
7
Does image, location, orientation and ratio matter?
To ensure there is no loss of visual impact of your image, you must select an image with a similar height and width ratio to that of your of the area you plan on covering.
Using an image of the wrong orientation will ultimately mean the picture height or width or both is reduced and the part of the photo you want will be cut off.
As an example, to fit an area that is twice as wide as it is high, your image will need to have a width and height aspect ratio of 2 to 1. If the image you have selected is square, but the area you are trying to cover is tall and thin, you may not be able to make the image fit. The image may need to be cropped to ensure the correct aspect ratio. We will always crop a picture rather than stretch one due to the resulting distortion.
Another condition is with the location of the image. Most images have a desired focal point and that may land over a range, which is good, or under a window, which is not so good.
8
File submission and art approval?
Once you have chosen your image please DO NOT purchase any images until we have advised if the image will work. You can email the link or attach the image to our email sales@practicalrentals.com. Once we receive this information and along with the photo and approx. panel sizes you wish to use, we will then advise if the image will work for your project.
Images that have not been purchased as yet will be of low resolution but will give you an idea and look of the image.
To give you some idea of the look of your image, please upload your room and image into our simulator. This will give you a good idea of fit, color, size and orientation.
We do not provide any mock-up of images until a quote has been accepted and a site measure carried out.
9
Can I make alterations, changes adds or deletions to my chosen picture?
The short answer is yes! Sometimes you may have small changes to the image at no extra cost .
However, if you require more intricate changes such as lightening, darkening, colour changes or a specific designs, adding or deleting elements, moving elements to change the focal points etc., this will incur Graphic Artist fees and will be priced at time of quoting.
We have fully capable photoshop and illustrator capabilities.
10
What happens once my art is chosen?
Our final quote will allow for purchase of any image(s) from one of the websites mentioned above.
If you require an image from a specific photographer or another website this will be at a cost to yourself and up you to purchase this image. The image will need to be a high resolution print ready file such as PNG, EPS, PDF, Tiff and to the panel size required. (we can resize at a cost)
Once there is an acceptance of the quote, we will then site measure. We will work with you to create a digital mock up the desired image to the panel sizes and provide a final digital mock up for approval. (these will be large digital files that we might reduce for email or share on the cloud)
We do not rush our process of digital printed art. We take pride in our printing and will take all due care to have the image to the best quality.
Please allow at least 20 working days, from site measure, signing of contract and deposit payment, for installation to begin. If there is any delay with our glass supplier or any other issue you will be kept up to date at all times. We do our best to have the panels installed early as possible but sometimes issues arise out of our control.
11
Will there be a contract and deposit?
We will have a short contract and scope description written up with an expected schedule. We will expect 50% deposit to start the process and will work with any contractors on progress draws for larger contracts exceeding 30 days